Excellent Non-Slip Performance Stain Concealment Bus Train and Coach Vehicle Safety PVC Flooring

Short Description:

How to clean PVC floor
1. Dry mopping
Remove dust and dirt from PVC plastic floor, using dry or wet yarn, microfiber or other available dry mop.
2. Vacuum cleaning
Use a vacuum cleaner to remove dust and loose dirt from PVC plastic floor. This cleaning method can be used instead of mopping in areas with restricted operation.
3. Slightly wet mopping
The mop should be slightly moistened with water or detergent. The method is to squeeze out the excess water from the mop with a special cleaning capstan. Alternatively, water or detergent can be sprayed on the mop. It should be noted that no water should accumulate on the PVC plastic floor. The floor must be completely dry within 15-20 seconds after the wiping is completed.
4. Multi-function floor scrubber
For areas with very heavy cleaning tasks, it is recommended to use a multi-function floor scrubber for cleaning, which can complete the scrubbing of the floor and collect the dirty water in one cleaning step. In addition, brushes and cleaning pads can also be used to complete the cleaning work.

Send email to us

Product Detail

Product Tags

New material High-end commercial PVC floor leather brand

Product Parameters

Brand: Quanshun	Series: Youjinglong Series
Material: Environmentally friendly PVC	Shape: Roll
Floor type: Multi-layer composite	Surface design: "Lotus Leaf Shield" ultra-fouling UV layer
Thickness: 2mm	Transparent wear-resistant layer thickness: 0.4mm (40 silk) / 0.5mm (50 silk)
Standard roll size: 2 meters wide * 20 meters long

Technical data	Test method	Test results
Total thickness	EN 428	2.0mm
Wear layer thickness	EN 429	0.35mm /0.4mm
Total weight	EN 430	1800g/㎡/3100g/㎡
Roll width	EN 426	2m
Roll length	EN 426	20m
Fire resistance	GB8624-2006	Bf1
Static indentation	EN 433	0.16
Light fastness	EN ISO 1005-302	≥6
Chemical resistance	EN 423	Good
Dimensional stability	EN 434	0.05%-0.10%
Slip resistance	DIN 51130	R9
Castor chair	EN 425	80000 or above
Sound insutation	EN ISO 717-2	19dB
Electrical resistance	EN 1081	≤10²
Anti iodine	ASTM F925	Excellent
Limit ofharmful substences	GB 18586-2001	Qualified

Additional Property

Castor chair	Antistatic Behavious
Underfoor Heating	Chemical Resistance

DOP test value
Not detected

Children's toy standard
Heavy metals not detected

Formaldehyde emission
Test value 0

REACH
EU high-risk carcinogens
Not detected

TVOC
Emission 28-day test
European standard 1/200

Solid color base-double stable layer series

Fiberglass + spunlace fabric is more stable, stronger and easier to lay

Product Introduction

More stable

The structure of glass fiber + spunlace fabric: double stable layers,

Each can be used as a stable layer independently,

Each can reach the national standard as a stable layer independently,

The two together make the product more stable, far exceeding the national standard.

Stronger

Structure of glass fiber + spunlace fabric:
Product strength is greatly improved:
Cannot be pulled, torn or folded.

Easier to lay

The bottom layer is made of spunlace material, which is more tolerant of the drying time of the floor leather; when constructing the back cover, the drying time is very strict. If the time is too long, the viscosity of the glue will be reduced; if the time is too short, it will not be firmly attached; skilled workers are required to flexibly control the temperature and humidity, turning the floor laying into a craftsman's work, and problems often occur in this link.

Easier to lay flat

Glass fiber + spunlace fabric structure: double stable layer,
making the product more stable, not easily deformed by external temperature
and extrusion, etc., with good flatness, easier to lay flat,
reducing the difficulty of construction.

Easier to replace

The bottom layer is made of spunlace cloth material. When replacing,

the base layer can be left intact and the entire floor glue can be completely peeled off,
reducing the cost of replacement and making the removal of the floor glue simple, convenient and low-cost.

Low requirements for the base floor

The base layer uses spunlace material, which reduces the requirements for the base floor and provides stronger bonding strength. This design reduces the cost of base floor treatment, facilitates the installation process, and enhances the stable connection between the floor and the ground.

Sound absorption

The bottom layer is made of spunlace material, which has better sound absorption effect. The unique fiber structure and high porosity of spunlace make sound waves easier to absorb and disperse, reducing reflection and transmission. At the same time, the spunlace fits tightly with the floor, reducing the transmission of sound through the gaps, further improving the sound absorption performance.

Moisture-proof

The bottom layer is made of spunlace material, which has better moisture-proof effect.
Spunlace can effectively prevent moisture penetration, tightly bond with the floor, and reduce moisture intrusion.
At the same time, spunlace also has good air permeability, helping the floor stay dry. These characteristics together improve the moisture-proof performance of the floor.

Advantages of polymer industrial coil floor:
1. Super strong compression resistance, can carry 30 tons of trucks and forklifts
2. Super wear resistance, 0.8mm polymer wear-resistant layer
3. Excellent antibacterial performance, Escherichia coli ATCC8739, Staphylococcus aureus ATCC6538P antibacterial rate 99.9%
4. Excellent antistatic performance
5. Excellent resistance to strong acid and alkali, 60% sulfuric acid solution, 55% sodium hydroxide solution, level 0
6. Fire retardant polymer industrial coil floor, fire rating BF1 level* and above, SGS third-party test report can be provided
Applicable to: electronics, microelectronics industry, pharmaceutical industry that requires high cleanliness, beauty, dust-free and sterility, and GMP standard, and can also be used in various industrial plants such as electronics and electrical schools, offices, food factories, chemical plants, etc.

01
Production of new materials
The product is made of new materials without recycled materials, which is more environmentally friendly and has stronger performance. This ensures the quality and reliability of the floor and provides users with a long-lasting and durable use experience.

"Lotus Leaf Shield" ultra-fouling-resistant UV layer
The surface layer adopts "Lotus Leaf Shield" UV technology, which has super strong stain resistance. This special coating can effectively prevent the adhesion of stains, keep the floor surface clean, and reduce the burden of cleaning work.

03
Embossed with rock pattern design
Embossed with rock pattern design can not only give the floor anti-slip function, but also have a beautiful appearance. More importantly, at the corners of the pattern, a gentle slope design is adopted to ensure that dirt will not hide. This design not only provides excellent anti-slip performance, but also makes it easy to clean and keep the floor clean and stain-free.

Double-layer stabilization layer
The double-layer structure of glass fiber and spunlace cloth makes the shrinkage rate of the product close to 0. This means that the floor can maintain a stable size under different temperature and humidity conditions, avoiding problems such as deformation or cracking.

05
0 Porous dense and pressure-resistant layer
The dense layer is manufactured using a single-layer extrusion process and is vacuum-extracted during the production process to eliminate the air in the middle, making the dense layer of the floor free of pores. This treatment makes the product more dense and strong, prolongs the service life of the floor, and can withstand high-intensity commercial use requirements.

06
Spunlace fabric sound-absorbing backing layer
The bottom layer is made of spunlace fabric material, which has the advantage of reducing the requirements for the base floor and providing stronger bonding strength. This design not only facilitates the installation process, but also enhances the stable connection between the floor and the ground.

07
Stain-resistant, durable, stable, and environmentally friendly
These advantages make 2.0mm thick dense commercial flooring an ideal choice for commercial places. It has excellent stain resistance, durability and stability, while meeting environmental protection requirements and providing users with high-quality flooring solutions.

08 Quan Shun-Youjinglong Series Flooring-Structure Diagram

Ultra-fouling-resistant UV layer

thickened transparent wear-resistant layer

Printing layer

Glass fiber stabilization layer

0-pore dense pressure-resistant layer

Spunlace sound-absorbing backing layer

Product color card

Download PVC Leather for Flooring Catalog

Product real scene application diagram

Restaurant

Nursery school

Gymnasium

Hospital

Nursing home

Factory production workshop

Office Building

Shopping malls and entertainment venues

Bedroom

Previous: Plastic public transport pvc vinyl bus flooring roll

Next: R10 Anti-Slip Safety PVC Flooring of Rail Station, Subway and Bathroom

Anti-Slip Bus Flooring

Emery Flooring

Flooring Vinyl Roll

Pvc Bus Flooring

PVC Flooring For Bus

PVC Flooring Rolls

Write your message here and send it to us