PVC Leather for Furniture
-
China leather Manufacturer direct supply soft embossed vinyl faux leather for sofa car seat cover
PVC artificial leather is a type of composite material made by combining polyvinyl chloride or other resins with certain additives, coating or bonding it on the base material and then processing it. It is similar to natural leather. It has the characteristics of softness and wear resistance.
During the production process of PVC artificial leather, the plastic particles need to be melted and mixed into a thick consistency, and then evenly distributed on the T/C knitted fabric base according to the specified thickness, and then put into a foaming furnace to start foaming. It has the flexibility to be suitable for processing various products and different requirements. Surface treatment (dying, embossing, polishing, matting, grinding and fluffing, etc.) is started at the same time as it is released, mainly based on actual requirements. product regulations to begin with). -
Wholesale Factory Embossed Pattern PVB Faux Leather for car seat upholstery and sofa
PVC leather is artificial leather made of polyvinyl chloride (PVC for short).
PVC leather is made by coating PVC resin, plasticizer, stabilizer and other additives on the fabric to make a paste, or by coating a layer of PVC film on the fabric, and then processing it through a certain process. This material product has high strength, low cost, good decorative effect, good waterproof performance and high utilization rate. Although the feel and elasticity of most PVC leathers still cannot achieve the effect of genuine leather, it can replace leather in almost any occasion and is used to make a variety of daily necessities and industrial products. The traditional product of PVC leather is polyvinyl chloride artificial leather, and later new varieties such as polyolefin leather and nylon leather appeared.
The characteristics of PVC leather include easy processing, low cost, good decorative effect and waterproof performance. However, its oil resistance and high temperature resistance are poor, and its low temperature softness and feel are relatively poor. Despite this, PVC leather occupies an important position in the industry and fashion world due to its unique properties and wide application fields. For example, it has been successfully used in fashion items including Prada, Chanel, Burberry and other big brands, demonstrating its wide application and acceptance in modern design and manufacturing. -
PU leather fabric artificial leather sofa decoration soft and hard cover sliding door furniture home decoration engineering decoration
The high temperature resistance of PVC leather depends on factors such as its type, additives, processing temperature and use environment.
The heat resistance temperature of ordinary PVC leather is about 60-80℃. This means that, under normal circumstances, ordinary PVC leather can be used for a long time at 60 degrees without obvious problems. If the temperature exceeds 100 degrees, occasional short-term use is acceptable, but if it is in such a high temperature environment for a long time, the performance of PVC leather may be affected.
The heat resistance temperature of modified PVC leather can reach 100-130℃. This type of PVC leather is usually improved by adding additives such as stabilizers, lubricants and fillers to improve its heat resistance. These additives can not only prevent PVC from decomposing at high temperatures, but also reduce melt viscosity, improve processability, and increase hardness and heat resistance at the same time.
The high temperature resistance of PVC leather is also affected by the processing temperature and the use environment. The higher the processing temperature, the lower the heat resistance of PVC. If PVC leather is used for a long time in a high temperature environment, its heat resistance will also decrease.
In summary, the high temperature resistance of ordinary PVC leather is between 60-80℃, while the high temperature resistance of modified PVC leather can reach 100-130℃. When using PVC leather, you should pay attention to its high temperature resistance, avoid using it in a high temperature environment, and pay attention to controlling the processing temperature to extend its service life.